Instructions & Maintenance

How to use

1. Screw the Super Sniffer on your bottle, do not twist on very tight as it is unnecessary and can crack the plastic over time.
2. Place against nostrils and push the button all the way in to get the strongest effect.
3. Sniff and release button.
4. Remove Super Sniffer from the bottle after usage session.
5. Rinse inside with water or alcohol after use.
   1. Do not leave on the bottle for storage.
   2. Keep bottle upright during use.

How to get a stronger sniff

1. Make sure you push the button completely in.
2. Swirl or give bottle 1 gentle shake before pressing button.

How to extend the life of your Super Sniffer

1. Don’t leave on for storage: extended exposure can weaken the plastic. We recommend no more than 5 hours at a time.
2. Clean after every use: flush inside with water or alcohol while pushing the button in & out.
   1. If button becomes sticky try soaking in alcohol or warm (NOT hot) water with dish soap for 10-15 minutes.
3. Leaving the Super Sniffer temperatures above 95 degrees for extended periods of time can cause the plastic to deform.
   1. Do not leave in a hot car or direct sunlight for extended periods of time.
4. Overtightening the Super Sniffer can cause the cap to crack over time and the button to stick. You do not need to put a lot of pressure tightening the cap to get a strong seal.